![]() |
|
|
|
|
|
|
|
|
|
| P4MTRE3 Wireless PSM System |
|
P4MTRE3 PSM 400 - System includes P4T transmitter, P4R receiver, P4M mixer, rackmount hardware, and E-1 earphones. 16 UHF frequencies, personal volume and balance controls, with built-in selectable limiter. A highly versatile stereo mic/line mixer for installed sound system applications and personal monitoring that provides easy access and\ control of up to four signals. |
|
|
|
| P4MHWE3,Wired PSM System |
|
P4MHWE3- PSM400- A highly versatile stereo mic/line mixer for installed sound system applications and personal monitoring that provides easy access and\ control of up to four signals. Two additional auxiliary inputs can be used to add channels from other sources. This system includes a hardwired personal monitor, the P4M personal monitor mixer, and the E1 earphones. |
|
|
|
|
|
|||||
|
|
|
P4T PSM
400 Wireless Transmitter- P4T Wireless
Transmitter. Built-in audio limiter External power supply Remotable/combinable antennas, 1/2 rack space. Operating Controls Earphone volume knob. Frequency select. LED Indicators, 4-segment input level Transmission Frequency. Inputs: Two 1/4" TRS line level. Outputs: Two 1/4" TRS loop outs. Local earphone monitor. |
|
|
|
|
|
|
P4R Wireless
Bodypack Receiver- High-impact plastic chassis. Frequency locator. Operating
Controls. Operating mode (Stereo, Mono, MixMode) Volume knob, Balance Defeatable limiter. High-frequency boost. Frequency select. Backlit LCD Indicators. RF reception. Battery life. Operating mode Frequency. |
|
359.00 |
|
|
|
|
P4HW-
PSM 400 Hardwired Personal Monitor- Hardwired
Bodypack.Features : Attached input cable High-impact plastic chassis, Operating Controls, Operating mode (Stereo, Mono, MixMode), Volume/ Balance knob. Defeatable limiter. |
|
|
|
|
|
|
P4M Personal Monitor Mixer- The P4M is a highly versatile four-channel, two-bus stereo mic/line mixer designed to optimize use of personal (in-ear) monitors like the Shure PSM 400 in live performance. The P4M features four balanced mic/line inputs, each with level and panning controls. Corresponding XLR split outputs allow input signals to pass through the unit unaffected. |
|
|
|
|
|
|
E3 Single
Driver Earphones - Single Low Mass/High EnergyTM drivers for high fidelity full-range sound and isolation from outside noise. Transducer Type: single low mass/high energy. Sensitivity (at 1 kHz): 115 dB SPL/mW Impedance (at 1 kHz) 26 ohms. Output Connector: Gold-plated stereo, 3.5 mm (1/8-inch) phone plug Cable Length: 1.57 m (62 inches). |
|
|
|